Best of 2024: Introduction to Visual Builder Studio, Visual Builder Cloud Service, Stand-Alone, and JET

Spela upp

The next generation of front-end user interfaces for Oracle Fusion Applications is being built using Visual Builder Studio and Oracle JavaScript Extension Toolkit. However, many of the terms associated with these tools can be confusing.   In this episode, Lois Houston and Nikita Abraham are joined by Senior Principal OCI Instructor Joe Greenwald. Together, they take you through the different terminologies, how they relate to each other, and how they can be used to deliver the new Oracle Fusion Applications as well as stand-alone, bespoke visual web applications.   Survey: https://customersurveys.oracle.com/ords/surveys/t/oracle-university-gtm/survey?k=focus-group-2-link-share-5   Develop Fusion Applications Using Visual Builder Studio: https://mylearn.oracle.com/ou/course/develop-fusion-applications-using-visual-builder-studio/138392/   Build Visual Applications Using Oracle Visual Builder Studio: https://mylearn.oracle.com/ou/course/build-visual-applications-using-oracle-visual-builder-studio/137749/   Oracle University Learning Community: https://education.oracle.com/ou-community   LinkedIn: https://www.linkedin.com/showcase/oracle-university/   X (formerly Twitter): https://twitter.com/Oracle_Edu   Special thanks to Arijit Ghosh, David Wright, and the OU Studio Team for helping us create this episode.   --------------------------------------------------------   Episode Transcript:   00:00 Welcome to the Oracle University Podcast, the first stop on your cloud journey. During this series of informative podcasts, we’ll bring you foundational training on the most popular Oracle technologies. Let’s get started. 00:26 Nikita: Hello and welcome to the Oracle University Podcast! I’m Nikita Abraham, Team Lead of Editorial Services with Oracle University, and with me is Lois Houston, Director of Innovation Programs. Lois: Hi there! If you’ve been following along with us, you’ll know that we’ve had some really interesting seasons this year. We covered Autonomous Database, Artificial Intelligence, Visual Builder Studio and Redwood, OCI Container Engine for Kubernetes, and Oracle Database 23ai New Features. Nikita: And we’ve had some pretty awesome special guests. Do go back and check out those episodes if any of those topics interest you. 01:04 Lois: As we close out the year, we thought this would be a good time to revisit some of our best episodes. Over the next few weeks, you’ll be able to listen to four of our most popular episodes of the year.  Nikita: Right, this is the best of the best–according to you–our listeners.   Lois: Today’s episode is #1 of 4 and is a throwback to a discussion with Senior Principal OCI Instructor Joe Greenwald on Visual Builder Studio. Nikita: We asked Joe about Visual Builder Studio and Oracle JavaScript Extension Toolkit, also known as JET. Together, they form the basis of the technology for the next generation of front-end user interfaces for Oracle Fusion Applications, as well as many other Oracle applications, including most Oracle Cloud Infrastructure (OCI) interfaces. 01:48 Lois: We looked at the different terminologies and technologies, how they relate to each other, and how they deliver the new Oracle Fusion Applications and stand-alone, bespoke visual web applications.  So, let’s dive right in. Nikita: Joe, I’m somewhat thrown by the terminology around Visual Builder, Visual Studio, and JET. Can you help streamline that for us? Lois: Yeah, things that are named the same sometimes refer to different things, and sometimes things with a different name refer to the same thing. 02:18 Joe: Yeah, I know where you’re coming from. So, let’s start with Visual Builder Studio. It’s abbreviated as VBS and can go by a number of different names. Some of the most well-known ones are Visual Builder Studio, VBS, Visual Builder, Visual Builder Stand-Alone, and Visual Builder Cloud Service. Clearly, this can be very confusing. For the purposes of these episodes as well as the training courses I create, I use certain definitions.  02:42 Lois: Can you take us through those? Joe: Absolutely, Lois. Visual Builder Studio refers to a product that comes free with an OCI account and allows you to manage your project-related assets. This includes the project itself, which is a container for all of its assets. You can assign teams to your projects, as well as secure the project and declare roles for the different team members. You manage GIT repositories with full graphical and command-line GIT support, define package, build, and deploy jobs, and create and run continuous integration/continuous deployment graphical and code-managed pipelines for your applications. These can be visual applications, created using the Visual Builder Integrated Development Environment, the IDE, or non-visual apps, such as Java microservices, docker builds, NPM apps, and things like that. And you can define environments, which determine where your build jobs can be deployed. You can also define issues, which allow you to identify, track, and manage things like bugs, defects, and enhancements. And these can be tracked in code review merge requests and build jobs, and be mapped to agile sprints and scrum boards. There’s also support for wikis for team collaboration, code snippets, and the management of the repository and the project itself. So, VBS supports code reviews before code is merged into GIT branches for package, build, and deploy jobs using merge requests. 04:00 Nikita: OK, what exactly do you mean by that? Joe: Great. So, for example, you could have developers working in one GIT branch and when they’re done, they would push their private code changes into that remote branch. Then, they’d submit a merge request and their changes would be reviewed. Once the changes are approved, their code branch is merged into the main branch and then automatically runs a CI/CD package (continuous integration/continuous deployment) package, build, and deploy job on the code. Also, the CI/CD package, build, and deploy jobs can run against any branches, not just the main branch. So Visual Builder Studio is intended for managing the project and all of its assets. 04:37 Lois: So Joe, what are the different tools used in developing web applications? Joe: Well, Visual Builder, Visual Builder Studio Designer, Visual Builder Designer, Visual Builder Design-Time, Visual Builder Cloud Service, Visual Builder Stand-Alone all kind of get lumped together. You can kinda see why. What I’m referring to here are the tools that we use to build a visual web application composed of HTML5, CSS3, JavaScript, and JSON (JavaScript Object Notation) for metadata. I call this Visual Builder Designer. This is an Integrated Development Environment, it’s the “IDE” which runs in your browser. You use a combination of drag and drop, setting properties, and writing and modifying custom and generated code to develop your web applications. You work within a workspace, which is your own private copy of a remote Git branch. When you’re ready to start development work, you open an existing workspace or create a new one based on a clone of the remote branch you want to work on. Typically, a new branch would be created for the development work or you would join an existing branch. 05:38 Nikita: What’s a workspace, Joe? Is it like my personal laptop and drive? Joe: A workspace is your own private code area that stores any changes you make on the Oracle servers, so your code changes are never lost—even when working in a browser-based, network-based tool. A good analogy is, say I was working at home on my own machine. And I would make a copy of a remote GIT branch and then copy that code down to my local machine, make my code changes, do my testing, etc. and then commit my work—create a logical save point periodically—and then when I’m ready, I’d push that code up into the remote branch so it can be reviewed and merged with the main branch. My local machine is my workspace. However, since this code is hosted up by Oracle on our servers, and the code and the IDE are all running in your browser, the workspace is a simulation of a local work area on your own computer. So, the workspace is a hosted allocation of resources for you that’s private. Other people can’t see what’s going on in your workspace. Your workspace has a clone of the remote branch that you’re working with and the changes you make are isolated to your cloned code in your workspace. 06:41 Lois: Ok… the code is actually hosted on the server, so each time you make a change in the browser, the change is written back to the server? Is it possible that you might lose your edits if there’s a networking interruption? Joe: I want to emphasize that while I started out not personally being a fan of web-based integrated development environments, I have been using these tools for over three years and in all that time, while I have lost a connection at times—networks are still subject to interruptions—I’ve never lost any changes that I’ve made. Ever. 07:11 Nikita: Is there a way to save where you are in your work so that you could go back to it later if you need to? Joe: Yes, Niki, you’re asking about commits and savepoints, like in a Git repository or a Git branch. When you reach a logical stopping or development point in your work, you would create a commit or a savepoint. And when you’re ready, you would push that committed code in your workspace up to the remote branch where it can be reviewed and then eventually merged, usually with the main Git branch, and then continuous integration/continuous package and deployment build jobs are run. Now, I’m only giving you a high-level overview, but we cover all this and much more in detail with hands-on practices in our Visual Builder developer courses. Right now, I’m just trying to give you a sense of how these different tools are used. 07:52 Lois: Yeah, that makes sense, Joe. It’s a lot to cover in a short amount of time. Now, we’ve discussed the Visual Builder Designer IDE and workspace. But can you tell us more about Visual Builder Cloud Service and stand-alone environments? What are they used for? What features do they provide? Are they the same or different things? Joe: Visual Builder Cloud Service or Visual Builder Stand-Alone, as it’s sometimes called, is a service that Oracle hosts on its servers. It provides hosting for the deployed web application source code as well as database tables for business objects that we build and maintain to store your customer data. This data can come from XLS or CSV files, or even your own Oracle database customer table data. A custom REST proxy makes calls to external third-party REST services on your behalf and supports several popular authentication mechanisms. There is also integration with the Identity Cloud Service (IDCS) to manage users and their access to your web apps. Visual Builder Cloud Service is a for-fee product. You pay licensing fees for how much you use because it’s a hosted service. Visual Builder Studio, the project asset management aspect I discussed earlier, is free with a standard OCI license. Now, keep in mind these are separate from something like Visual Builder Design Time and the service that’s running in Fusion application environments. What I’m talking about now is creating stand-alone, bespoke, custom visual applications. These are applications that are built using industry-standard HTML5, CSS3, JavaScript, and JSON for metadata and are hosted on the Oracle servers.  09:30 Are you looking for practical use cases to help you plan and apply configurations that solve real-world challenges?  With the new Applied Learning courses for Cloud Applications, you'll be able to practically apply the concepts learned in our implementation courses and work through case studies featuring key decisions and configurations encountered during a typical Oracle Cloud Applications implementation. Applied learning scenarios are currently available for General Ledger, Payables, Receivables, Accounting Hub, Global Human Resources, Talent Management, Inventory, and Procurement, with many more to come!  Visit mylearn.oracle.com to get started. 10:12 Nikita: Welcome back! Joe, you said Visual Builder Cloud Service or Stand-Alone is a for-fee service. Is there a way I can learn about using Visual Builder Designer to build bespoke visual applications without a fee? Joe: Yes. Actually, we’ve added an option where you can run the Visual Builder Designer and learn how to create web apps without using the app hosting or the business object database that stores your customer data or the REST proxy for authentication or the Identity Cloud Service. So you don’t get those features, but you can still learn the fundamentals of developing with Visual Builder Designer. You can call third-party APIs, you can download the source, and run it locally, for example, in a Tomcat server. This is a great and free way to learn how to develop with the Visual Builder Designer. 10:55 Lois: Joe, I want to know more about the kinds of apps you can build in VB Designer and the capabilities that VB Cloud Service provides. Joe: Visual Builder Designer allows you to build custom, bespoke web applications made of interactive webpages; flows of pages for navigation; events that respond when things happen in the app, for example, GUI events like a button is clicked or values are entered into a text field; variables to store the state of the application and the ability to make REST calls, all from your browser. These applications have full access to the Oracle Fusion Applications APIs, given that you have the right security permissions and credentials of course. They can access your customer business data as business objects in our internally hosted database tables or your own customer database tables. They can access third-party APIs, and all these different data sources can appear in the same visual application, on the same page, at the same time. They use the Identity Cloud Service to identify which users can log in and authenticate against the application. And they all use the new Redwood graphical user interface components and page templates, so they have the same look and feel of all Oracle applications. 12:02 Nikita: But what if you’re building or extending Oracle Fusion Applications? Don’t things change a little bit? Joe: Good point, Niki. Yes. While you still work within Visual Builder Studio, that doesn’t change, VBS maintains your project and all your project-related assets, that is still the same. However, in this case, there is no separate hosted Visual Builder Cloud Service or Stand-Alone instance. In this case, Visual Builder is hosted inside of Fusion apps itself as part of the installation. I won’t go into the details of how the architecture works, but the Visual Builder instance that you’re running your code against is part of Fusion applications and is included in the architecture as well as the billing. All your code changes are maintained and stored within a single container called an extension. And this extension is a Git repository that is created for you, or you can create it yourself, depending on how you choose to work within Visual Builder Studio. You create an extension to hold the source code changes that provide a customization or configuration. This means making a change to an existing page or a set of pages or even adding new pages and flows to your Oracle Fusion Applications. You use Visual Builder Studio and Visual Builder Designer in a similar way as to how you would use them for bespoke stand-alone visual applications. 13:12 Lois: I’m trying to envision how this workflow is used. How is it different from bespoke VB app development? Or is it different at all? Joe: So, recall that the Visual Builder Designer is effectively the Integrated Development Environment, the IDE, where you make your code changes by working with both the raw HTML5, CSS3, and JavaScript code, if need be, or the Page Designer for drag and drop, and setting properties and then Live mode to test your work. You use a version of VB Designer to view and modify your customizations, and the code is stored in a Git repository called an extension. So, in that sense, the work of developing pages and flows and such is the same. You still start by creating or, more typically, joining a project and then either create a new extension from scratch or base it on an existing application, or go directly to the page that you want to edit and, on that page, select from your profile menu to edit in Visual Builder Studio. Now, this is a different lifecycle path from bespoke visual applications. With them, you’re not extending an app or modifying individual pages in the same way. You get a choice of which project you want to add your extension to when you’re working with Fusion apps and potentially which repository to store your customizations, unless one already exists and then it’s assigned automatically to hold your code changes. So you make your changes and edits to the portions of the application that have been opened for extensibility by the development team. This is another difference. Once you make your code changes, the workflow is pretty much the same as for a bespoke visual application: do your development work, commit your changes, push your changes to the remote branch. And then typically, your code is reviewed and if the code passes and is approved, it’s merged with the main branch. Then, the package and deploy jobs run to deploy the main code to the production environment or whatever environment you’re targeting. And once the package and deploy jobs complete, the code base is updated and users who log in see the changes that you’ve made. 15:03 Nikita: You mentioned creating apps that combine data from Fusion cloud, applications, customer data, and third-party APIs into one page. Why is it necessary? Why can’t you just do all that in one Fusion Applications extension? Joe: When you create extensions, you are working within the Oracle Fusion Applications ecosystem, that’s what they actually call it, which includes a defined a set of users who have been predefined and are, therefore, known to Fusion Applications. So, if you’re a user and you’re not part of that Fusion Apps ecosystem, you can’t access the pages. Period. That’s how Fusion Apps works to maintain its security and integrity. Secondly, you’re working pretty much solely with the Fusion Applications APIs data sources coming directly from Fusion Applications, which are also available to you when you’re creating bespoke visual apps. When you’re working with Fusion Applications in Visual Builder, you don’t have access to these business objects that give you access to your own customer database data through Visual Builder-generated REST APIs. Business objects are available only to bespoke visual applications in the hosted VB Cloud Service instance. So, your data sources are restricted to the Oracle Fusion Applications APIs and some third-party APIs that work within a narrow set of authentication mechanisms currently, although there are plans to expand this in the future. A mashup app that allows you now to access all these data sources while creating apps that leverage the Redwood Component System, so they look and work like Fusion Apps. They’re a highly popular option for our partners and customers. 16:28 Lois: So, to review, we have two different approaches. You can create a visual application using the for-fee, hosted Visual Builder Cloud Service/Stand-Alone or the one that comes with Oracle Integration Cloud, or you can use the extension architecture for Fusion applications, where you use the designer and create your extensions, and the code is delivered and deployed to Fusion applications code. You haven’t talked about JET yet though, Joe. What is that? Joe: So, JET is an abbreviation. It stands for Oracle JavaScript Extension Toolkit and JET is the underlying technology that makes Visual Builder, visual applications, and Visual Builder Extensions for Fusion Applications possible. Oracle JavaScript Extension Toolkit provides a module-based, open-source toolkit that leverages modern JavaScript, TypeScript, CSS3, and HTML5 to deliver web applications. It’s targeted at JavaScript developers working on client-side applications. It is not for backend development.  It’s a collection of popular, powerful JavaScript libraries and a set of Oracle-contributed JavaScript libraries that make it very simple, easy, and efficient to build front-end applications that can consume and interact with Oracle products and services, especially Oracle Cloud services, but of course it can work with any type of third-party API. 17:44 Nikita: How are JET applications architected, Joe, and how does that relate to Visual Builder pages and flows? Joe: The architecture of JET applications is what’s called a single page architecture. We’ve all seen these. These are where you have a single webpage—think of your index page that provides the header and footer for your webpage—and then the middle portion or the middle content of the page, represented by modules, allow you to navigate from one page or module to another. It also provides the data mapping so that the data elements in the variables and the state of the application, as well as the graphical user interface elements that provide the fields and functionality for the interface for the application, these are all maintained on the client side. If you’re working in pure JET, then you work with these modules at the raw JavaScript code level. And there are a lot of JavaScript developers who want to work like this and create their custom applications from the code up, so to speak. However, it also provides the basis for Visual Builder visual applications and Fusion Apps visual extensions in Visual Builder. 18:41 Lois: How does JET support VB Apps? You didn’t talk much about having to write a bunch of JavaScript and HTML5, so I got the impression that this is all done for you by VB Designer? Joe: Visual Builder applications are composed of HTML5, CSS3, and JavaScript code that is usually generated by the developer when she drags and drops components on to the page designer canvas or sets properties or creates action chains to respond to events. But there’s also a lot of JavaScript object notation (JSON) metadata created at the time that describes the pages, the flows, the navigation, the REST services, the variables, their data types, and other assets needed for the app to function. This JSON metadata is translated at runtime using a large JavaScript extension toolkit library called the Visual Builder Runtime that runs in the browser and real time translates the metadata and other assets in the Visual Builder source code into JET code and assets, which are actually executed at runtime. And it’s very quick, very fast, very efficient, and provides a layer of abstraction between the raw JET code and the Visual Builder architecture of pages, flows, action chains for executing code and events to handle things that occur in the user interface, including saving the state in variables that are mapped to GUI components. For example, if you have an Input text component, you need to have a variable to store the value that was entered into that Input text component between page refreshes. The data can move from the Input text component to the variable, and from the variable to that Input text component if it’s changed programmatically, for example. So, JET manages binding these data values to variables and the UI components on the page. So, a change to a variable value or a change to the contents of the component causes the others to change automatically. Now, this is only a small part of what JET and the frameworks and libraries it uses do for the applications. JET also provides more complex GUI components like lists and tables, and selection lists, and check boxes, and all the sorts of things you would expect in a modern GUI application. 20:37 Nikita: You mentioned a layer of abstraction between Visual Builder Studio Designer and JET. What’s the benefit of working in Visual Builder Designer versus JET itself? Joe: The benefit of Visual Builder is that you work at a higher level of abstraction than having to get down into the more detailed levels of deep JavaScript code, working with modules, data mappings, HTML code, single page architecture navigation, and the related functionalities. You can work at a higher level, a graphical level, where you can drag and drop things onto a design canvas and set properties. The VB architecture insulates you from the more technical bits of JET. Now, this frees the developer to concentrate more on application and page design, implementing logic and business rules, and creating a pleasing workflow and look and feel for the user. This keeps them from having to get caught up in the details of getting this working at the code level. Now if needed, you can write custom JavaScript, HTML5, and CSS3 code, though much less than in a JET app, and all that is part of the VB application source, which becomes part of the code used by JET to execute the application itself. And yet it all works seamlessly together. 21:38 Lois: Joe, I know we have courses in JavaScript, HTML, and CSS. But does a developer getting ready to work in Visual Builder Designer have to go take those courses first or can they start working in VB Designer right away? Joe: Yeah, that question does often comes up: Do I need to learn JET to work with Visual Builder? No, you don’t. That’s all taken care for you in the products themselves. I don’t really think it helps that much to learn JET if you are going to be a VB developer. In some ways, it could even be a bit distracting since some of things you learn to do in JET, you would have to unlearn or not do so much because of what VB does it for you. The things you would have to do manually in code in JET are done for you. This is why we call VB a low code development tool. I mean, you certainly can if you want to, but I would spend more time learning about the different GUI components, page templates, the Visual Builder architecture — events, action chains, and the data provider variables and types. Now, I know JET myself. I started with that before learning Visual Builder, but I use very little of my JET knowledge as a VB developer. Visual Builder Designer provides a nice, abstracted, clean layer of modern visual development on top of JET, while leveraging the power and flexibility of JET and keeping the lower-level details out of my way. 22:49 Nikita: Joe, where can I go to get started with Visual Builder? Joe: Well, for more information, I recommend you take a look at our Develop Fusion Applications course if you’re working with Fusion Applications and Visual Builder Studio. The other course is Develop Visual Applications with Visual Builder Studio and that’s if you’re creating stand-alone bespoke applications. Both these courses are free. We also have a comprehensive course that covers JavaScript, HTML5, and CSS3, and while it’s not required that you take that to be successful, it can be helpful down the road. I would also say that some basic knowledge of HTML5, CSS3, and JavaScript will certainly support you and serve you well when working with Visual Builder. You learn more as you go along and you find that you need to create more sophisticated applications. I would also mention that a lot of the look and feel of the applications in Visual Builder visual applications and Fusion apps extensions and customizations come through JET components, JET styles, and JET variables, and CSS variables, so that’s something that you would want to pursue at some point. There’s a JET cookbook out there. You can search for Oracle JET and look for the JET cookbook and that’s a good introduction to all of that. 23:50 Nikita: We hope you enjoyed that conversation. To learn about some of the courses Joe mentioned, visit mylearn.oracle.com to get started. Lois: Before we wrap up, we’ve got a favor to ask. We’ve created a short survey to capture your thoughts on the podcast. It’ll only take a few minutes of your time. Just click the link in the show notes and share your feedback. We want to make sure we’re delivering the best experience possible so don't hesitate to let us know what's on your mind! Thanks for your support. Join us next week for another throwback episode. Until then, this is Lois Houston… Nikita: And Nikita Abraham, signing off! 24:30 That’s all for this episode of the Oracle University Podcast. If you enjoyed listening, please click Subscribe to get all the latest episodes. We’d also love it if you would take a moment to rate and review us on your podcast app. See you again on the next episode of the Oracle University Podcast.